home *** CD-ROM | disk | FTP | other *** search
- Path: news-m01.ny.us.ibm.net!usenet
- From: visan@ibm.net
- Newsgroups: comp.dcom.modems
- Subject: Re: Courier V.34+ problems
- Date: 7 Apr 1996 22:47:15 GMT
- Message-ID: <4k9glj$39qm@news-s01.ny.us.ibm.net>
- References: <4k1qiq$531@nntp5.u.washington.edu>
- Reply-To: visan@ibm.net
- NNTP-Posting-Host: slip139-92-41-184.ut.nl.ibm.net
- X-Newsreader: IBM NewsReader/2 v1.2.5
-
- In <4k1qiq$531@nntp5.u.washington.edu>, jedlow@dirac.phys.washington.edu (Alan Jedlow) writes:
-
- Hi, Alan!...
-
- >I just tried to test 2 Courier V.Everything modems...
- >
- >They would connect, but I could not get them to "talk" to each other
- >unless I disabled the 31.2 and 33.6 speeds(ATS56.5=1).
- >
- >One oddity, one modem would echo "CONNECT 33600" the other would echo
- >"CONNECT 31200" after the negotiation.
- >
-
- Yes, it is very normal: Since the V.34 modulation protocol
- allow different connection speed in TX and RX in the same link
- and the USR Courier only show the RX conection speed.
-
- But this is not a problem, because the link is ready in both, TX and RX.
-
- >Comments/suggestions ?
- >
-
- Hope this help!...=;)
-
- Best regards.
-
- Vicente Sanchez. EB4BSQ.
- AKA visan@ibm.net
- SysOp de MERCURIO BBS.
-
-
-
- MERCURIO BBS - 24H@33K6 - HAM&COMMS
- V.34plus - 33K6 - Paradyne Data Engine
- Data: +341 525 8090 - Fax: +341 465 9376
-
-